Manufacturing Sand from Rocks with B-VSI-7611 in UAE
The introduction of B series Deep Rotor VSI cone crusher has solved two common problems in quarry field. A shortage of natural sand lead the quarry owner to seek a machine can produce fine sand. Also, the construction market demand for better aggregate shape.
Case Study of this project
A quarry operator in the UAE needed to expand their crushing and screening plant in order to cope with an increase in chip and sand demand from the market. Material is granite. They already have one primary and a secondary crusher. Material comes out from the impact above 20mm. the secondary crusher was being operated at very tight settings, but still was unable to cope with the fines requirements. Final products they required is 0-5mm; 5-10mm; 10-20mm (total 3 products).
Solution for this project:
After consultation with our Mineral’s engineer, they would like to add a B Series Deep Rotor VSI-7611 in the existing plant. This sand making machine will carry the material from the existing plant of (20-40mm) and reduce it to 0-5mm; 5-10mm; 10-20mm. The VSI crusher is designed to produce very good particle shape and a high preparation of fines. After commissioning, the capacity of up to 150TPH easily, which exactly meet the quarry owner’s initial plan.
Advantage of B-Deep Rotor VSI Crusher:
Rotor is the heart of VSI, the success of SBM B-VSI attributes to the application of new technology for its deep rotor.
The deep rotor is about 50% greater than that of normal rotor, which means there is a greater space between distributor and feed eye ring, as well as between the upper and lower wearing plates. Capacity in this way improves at least 30% then the traditional VSI crusher.
incoming search terms
- sand making plant india
- sand making machine in india
- machine made sand from stones
- cost of sand making machine in india
- stone crushing plant design